News

 

Pipe Entry Connection for cable and potable water pipes

- Pipe entry conduit for cable and potable water pipes OD 25 to 45 mm

- Good for concrete walls up to 400 mm thickness, and drilling diameter   for masonry: 65 to 70 mm

- Sealing between cable and pipe entry

- conduit by shrinkable tubing

- Easy handling, low weight

- Quick installation

- Length: 700 mm (shortable...

 

Hawle PRO-Butterfly Valve with loose flanges

- Pressure proportional operating sealing - Two restraint loose flanges - Simple storage due to exchangeable loose flanges (PN 10/16) - Medium: Potable water - Max. operating pressure: 16 bar - Nominal sizes: DN 150 to DN 600

 

Optifil - automatic backwash filter

- Filter system for fine particles and turbidities

- Filter pore size 1 µm to 150 µm

- Filter mesh of stainless steel

- All materials suitable for use with water and food

- Backwash without interruption of filtration

- Minimum amount of backwash medium needed

- Different body sizes for flow rates 20 bis 600 m³/h

- Quick...

 

Waste Water Valve with knife gate and loose flanges

- Spindle has no contact to medium

- Reliable, leak-tight shut-off function by means of blade and o-ring seal

- Ideal for pressure lines in burried installation

- Top section can be replaced under pressure

- Loose flange system:  - no dismantling piece necessary  - ideal for rehabilitation jobs

- Medium: Waste...

 

Hawle R1-Hydrant DN 150

- Operation by vulcanized ringcylinder system

- Very low operating torque

- Stone trap-prevent demage at ringcylinder shut-off

- Stand pipe rotatable 360°

- Hydrant head rotatable 360°

- High discharge capacity while shut-off

- Outlet options:

             - 2 x B   ...

 

Predetermined breaking point for Hawle underground hydrant

• The predetermined breaking point consists of a support sleeve, screws with predetermined breaking point and safety screws made from stainless steel.

• Max. operating pressure: 16 bar

 

Ball check valve

• Loose flange:- Ideal for replacing existing valves- No need for dismantling joint for new installation• Hinged cover with joint function:- Easy to install and remove- No risk of screw/nut/washer falling into shaft• Stainless steel drainage opening:- For emptying or cleaning the ball check valve• Body material: GJS-400/Hawle...

Displaying results 1 to 7 out of 12

1

2

Next >