241-01
Universal Hawlinger for later drilling with horizontal female thread outlet in pipe direction

Universal Hawlingers for later drilling are to be used for installation on DCI, steel, and AC pipes DN 65 - DN 500. Adaptation to the main pipe is effected via holding strap and saddle gasket (model no. 309-00, 310-00 or model no. 311-00, 311-01, 311-02, 311-03 ) of the appropriate nominal width.

Hawlingers are used for later drilling of previously installed service lines. Thus, the high hygienic requirements, especially the specifications of DIN 1988 (avoiding of eddying areas), are consistently implemented. By using this system it is no longer required to dig up the pipeline for drilling the main line in the course of putting the house service connection into service.

In combination with fittings with double O-ring gasket the upper female thread outlet with sealing surface is used to connect service lines.

For later drilling via the drilling conduit and operation of the extension spindle we recommend the
use of our surface box (model no. 212-00).

General information see Universal Hawlinger (model no. 241-00)

* Not included in the scope of supply

Picture:
1: Universal-Hawlinger
2: Sealing plugs
3: Telescopic extension spindle
4: Square bars 20 mm
5: Steel galvanized steel pipe 2"
6: Steel endcap
Important note: Position 3, 4, 5 and 6 are not part of the standard product and must be ordered separately!

Material: Body: GJS-400, Hawle epoxy powder coated
Spindle, shut-off device,
shut-off blade: stainless steel
Gaskets: EPDM
Max. operating Pressure: Potable water: 16 bar
Medium Water

Universal Hawlingers for later drilling are to be used for installation on DCI, steel, and AC pipes DN 65 - DN 500. Adaptation to the main pipe is effected via holding strap and saddle gasket (model no. 309-00, 310-00 or model no. 311-00, 311-01, 311-02, 311-03 ) of the appropriate nominal width.

Hawlingers are used for later drilling of previously installed service lines. Thus, the high hygienic requirements, especially the specifications of DIN 1988 (avoiding of eddying areas), are consistently implemented. By using this system it is no longer required to dig up the pipeline for drilling the main line in the course of putting the house service connection into service.

In combination with fittings with double O-ring gasket the upper female thread outlet with sealing surface is used to connect service lines.

For later drilling via the drilling conduit and operation of the extension spindle we recommend the
use of our surface box (model no. 212-00).

General information see Universal Hawlinger (model no. 241-00)

* Not included in the scope of supply

Picture:
1: Universal-Hawlinger
2: Sealing plugs
3: Telescopic extension spindle
4: Square bars 20 mm
5: Steel galvanized steel pipe 2"
6: Steel endcap
Important note: Position 3, 4, 5 and 6 are not part of the standard product and must be ordered separately!