- 1)
- Horizontal PE outlet in pipe direction
- 2)
- Horizontal PE outlet 90° to pipe direction
247-00
PE-Hawlinger with upper PE fusion endoutlet and lower electrofusion saddle
Material: |
Body/electrofusion saddle: PE 100 Spindle, shut-off device, shut-off blade: stainless steel Gaskets: EPDM for potable or NBR for gas |
---|---|
Max. operating Pressure: | Potable water: 16 bar |
Medium | Water |
PE Hawlingers with HA-WELD® electrofusion saddles are to be used for welding onto PE pipes.
The horizontal PE end (in pipe direction or 90° to pipe direction) can be used for installation of a push-fit fitting or for welding into PE pipelines via resistance welding or butt-welding.
The vertical outlet with male thread (protected by a threaded cap of PE) serves the purpose of accommodating the drilling device.
PE Hawlingers are provided with a shut-off blade of stainless steel driven via slotted link gear as shut-off device. The shut-off blade is moved at low wear in horizontal direction against fixed stops.
To open or close the outlet area only one half revolution (180°) is required. In combination with a drilling device, the shut-off system permits the easy under pressure drilling of the main line.
Horizontal PE outlet: d 40 mm
Order Nr.
|
*) |
L |
Description |
L1 |
B |
D |
H1 |
H2 |
Borehole max. |
Outlet O |
Medium | Weight | Specification | Basket |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
2470900320
|
1) | 263 mm | 170 mm | 145 mm | 90 mm | 221 mm | 52 mm | 25 mm | 40 mm | 1,70 kg | ||||
2470901320
|
2) | 263 mm | 170 mm | 145 mm | 90 mm | 221 mm | 52 mm | 25 mm | 40 mm | 1,70 kg | ||||
2471250320
|
1) | 263 mm | 170 mm | 180 mm | 125 mm | 109 mm | 40 mm | 25 mm | 40 mm | 1,90 kg | ||||
2471251320
|
2) | 263 mm | 170 mm | 180 mm | 125 mm | 109 mm | 40 mm | 25 mm | 40 mm | 1,90 kg | ||||
2471600320
|
1) | 263 mm | 170 mm | 220 mm | 160 mm | 207 mm | 39 mm | 25 mm | 40 mm | 2,10 kg | ||||
2471601320
|
2) | 263 mm | 170 mm | 220 mm | 160 mm | 207 mm | 39 mm | 25 mm | 40 mm | 2,10 kg | ||||
2472250320
|
1) | 263 mm | 170 mm | 295 mm | 225 mm | 208 mm | 39 mm | 25 mm | 40 mm | 3,00 kg | ||||
2472251320
|
2) | 263 mm | 170 mm | 295 mm | 225 mm | 208 mm | 39 mm | 25 mm | 40 mm | 3,00 kg | ||||
8700000000
|
Surcharge for spindle bore | 0,00 kg |
-
Drilling adaptor Ord. No. 831 003 6300 must be used as transition to the "Hawlomat" drilling device.